Get Your Ballpark Price
Home › Recent Projects › Belleville Covered Bridge Lane Roof Replacement

GAF Royal Sovereign Roof Replacement — Belleville, IL 62221

A completed project on Covered Bridge Lane in Belleville, IL 62221 — 16.67 squares of GAF GAF Royal Sovereign, installed by our own crews. Street name and ZIP only; we never publish a customer’s house number.

See what your roof needs

Free inspection, documented slope by slope. No obligation.

We never sell your information. A local project manager will call you back.

GAF Royal Sovereign shingle line as installed in Belleville
GAF Royal SovereignGAF Royal Sovereign · GAF · 16.67 squares · Roof replacement

At a glance: John Beal Roofing replaced the roof on Covered Bridge Lane in Belleville, IL 62221, finishing September 16, 2026. 16.67 squares of GAF GAF Royal Sovereign, installed over synthetic underlayment across the full deck. Handled by our St. Louis office (314-429-6000).

This one was a 16.67-square roof (1,667 square feet), about what a standard ranch house carries on Covered Bridge Lane in Belleville, IL, the St. Clair County seat on the Illinois side of the metro. It was one of 8 roof replacements our crews completed in Belleville in September 2026. On top: GAF Royal Sovereign. Underneath: synthetic underlayment across the full deck plus ice and water membrane where water collects.

What the work order shows

LocationCovered Bridge Lane (Belleville, IL 62221)
CompletedWednesday, September 16, 2026
Opened to completed26 days
Roof size16.67 squares (about 1,667 sq ft)
Scope of workFull tear-off and roof replacement
ShingleGAF — GAF Royal Sovereign
UnderlaymentJBI Synthetic
Ice & waterAlco Ice & Water
Starter courseGAF Starter
Hip & ridgeGAF Hip & Ridge
VentilationLomanco Omni Roll ridge vent
WarrantyLifetime workmanship warranty
Project numberSTL082126004

Want to see what GAF Royal Sovereign looks like on a whole house? Try every color in our GAF Royal Sovereign color selector.

Materials installed, layer by layer

GAF Royal Sovereign is a traditional three-tab shingle, a flat, uniform look that suits smaller sections, outbuildings and homes originally built with three-tab. People shop for the shingle, but what’s underneath it and how the edges are finished decide how long the roof lasts. On this job:

  • Synthetic underlayment, edge to edge. It doesn’t wrinkle or tear like felt, and it keeps the deck dry if a shower pops up mid-job.
  • Self-sealing ice and water membrane where water concentrates. It seals around every nail driven through it, which matters in valleys and at the eaves.
  • GAF Starter strip along every edge. The first course is where wind gets under a roof. A factory starter with its own sealant line locks it down.
  • GAF Hip & Ridge on the hips and peak. Matching cap shingles made for the job, not field shingles cut into pieces.
  • Lomanco Omni Roll ridge vent. Continuous exhaust at the peak. Together with the soffit intake, it moves heat and moisture out of the attic.

Who installed it

The crew came out of our St. Louis office. The job was opened in our system on August 21, 2026 and the crew finished on September 16, 2026, 26 days later. John Beal Roofing has been family-run since 1947, and our lifetime workmanship warranty covers the installation for as long as you own the home. We answer the phone around the clock, storms included. See 24/7 emergency service.

Need a roof in Belleville?

Free inspection, documented slope by slope, no obligation. St. Louis office: 314-429-6000

Get My Free InspectionCall St. Louis — 314-429-6000

Common questions about this job

What shingle was installed on this Belleville roof?

GAF GAF Royal Sovereign, over synthetic underlayment across the full deck. The full system is in the project details table above.

How long did this project take from start to finish?

26 days from the day the job was opened to the day the crew finished. Most of that time is scheduling, material ordering and any insurance paperwork. The tear-off and install usually take a day or two on a house this size.

How big was the roof on Covered Bridge Lane?

16.67 squares, or about 1,667 square feet of roof surface. A roofing square is 100 square feet. Roofs are measured and priced that way, not by the square footage of the floor plan.

What kind of ventilation went on this roof?

A Lomanco Omni Roll ridge vent along the peak. Paired with soffit intake, it lets hot, moist attic air escape.

Who do I call about a roof in Belleville?

Our St. Louis office at 314-429-6000. A person answers 24 hours a day, including nights, weekends and holidays.

More recent projects nearby

Call 1-800-564-6232Free Inspection