At a glance: Completed 2026-10-08: fascia wrap & soffit repair on Pembury Drive, Chesterfield, MO 63017. Office: St. Louis, 314-429-6000.
The call on Pembury Drive
On Pembury Drive, the fascia was wrapped in aluminum on both the front and back of the fascia board, with the drip edge bent back to support the soffit. That is a solid detail when it is fastened, but over time pieces had worked loose at several corners.
From the ground it looked like small things. Left alone, loose wrap lets water behind it and lets the soffit drop out of position.
What we found in Chesterfield 63017
Loose fascia wrap at the left front, left rear and right front, a slipped piece at the left rear eave, and a missing piece at the right rear corner.
What the work order shows
- Secured the back side of the fascia wrap at the left front eave.
- Slid the slipped piece at the left rear eave back into position and secured it.
- Secured the back side of the fascia at the right front.
- Installed a new white aluminum piece at the right rear corner using white coil, soffit and trim nails.
- Cleaned up.
Four corners, four different problems
The Pembury Drive home did not have one fascia problem, it had four. The left front and right front needed the back side of the wrap secured. At the left rear eave a piece had slipped and needed to slide back into position. At the right rear corner a piece was missing entirely and had to be fabricated new from white coil.
Corners are where wrap is cut, bent and overlapped the most, so they are where it loosens first. Wind gets under a loose edge and works it farther every storm.
How the fascia and soffit work together on this house
On this home the aluminum wraps both the front and back of the fascia, and the drip edge is bent back to help support the soffit. When the wrap loosens, the soffit loses its support and can drop or gap, opening the eave to weather and animals.
The crew re-secured everything with soffit and trim nails, restoring the support and closing the edges. The new white piece at the right rear matches the existing trim.
Roofer near me in Chesterfield 63017
Central Chesterfield homeowners searching roofer near me can reach our St. Louis office at 314-429-6000. We handle trim and edge repairs along with roofs, so you do not need a separate contractor for small exterior work.
If you see a loose piece of fascia or a sagging soffit, have it looked at before it lets water or critters in.
Why small trim problems grow
Loose aluminum trim is easy to ignore. It does not leak into the house right away, and from the ground a lifted corner looks minor. But once wind gets under an edge, every storm bends it a little farther. Water that gets behind the wrap sits against the wood fascia, and wood that stays wet rots.
Rotten fascia means gutters that pull away, soffit that drops, and an open path for squirrels, birds and wasps into the attic. Fixing a loose corner costs a fraction of replacing rotten boards.
What we look for on an eave walk
When we inspect fascia and soffit, we walk the full perimeter of the house. We look for gaps between the wrap and the drip edge, soffit panels that have slipped out of their channel, nail heads backing out, stains under the eave, and signs of animals. On Pembury Drive that walk found four separate issues at four corners, all fixed in one visit.
Matching trim on Chesterfield homes
White aluminum is the most common trim color on homes in 63017, and matching coil and soffit are standard stock. When a piece is missing, like at the right rear corner here, the crew bends a new piece on site to fit.
Drip edge bent back to support the soffit
On this home the drip edge was bent back as part of the soffit support system. That is a detail some installers use so the soffit panels have a solid edge to rest on at the fascia. When the fascia wrap loosens, that support loosens too, and the soffit can sag or slip. Re-securing the wrap restored the support along each corner.
Using the right fasteners
Aluminum trim is installed with soffit and trim nails, small colored nails made for the job that resist rust and blend with the finish. Using ordinary nails can cause stains, corrosion or split trim. The crew used white trim nails so every repair point disappears into the white finish.
A one-visit fix
Four corners, one slipped piece and one missing piece were all handled in a single visit, keeping the cost and disruption low for the homeowner on Pembury Drive.
When to call about trim
Call if you see a corner of aluminum lifting, a soffit panel sagging, a gap between the gutter and the house, or animals going in and out at the eave. These are quick, affordable fixes when caught early. Our St. Louis office can usually take care of them in one visit, as the crew did on Pembury Drive. Small trim repairs protect the wood behind them, and the wood behind them holds up your gutters and closes your attic. A free inspection covers the whole perimeter of the house, not just the corner you noticed.
Roofer near me in 63017 for trim and edges
If you search roofer near me in central Chesterfield because of a loose fascia corner or a sagging soffit, you do not need a separate siding or gutter contractor. Our St. Louis crews carry white coil, soffit and trim nails and handle edge repairs like the four corners on Pembury Drive in a single trip.
Roof repair in Chesterfield, MO 63017
ZIP 63017 covers central Chesterfield, from the Chesterfield Valley to the neighborhoods around Clarkson and Baxter Roads. Wrapped fascia is standard on homes here, and our Maryland Heights headquarters is about 15 minutes away.
If you live on or near Pembury Drive and are seeing the same kind of problem, call our St. Louis office at 314-429-6000 or our 24/7 line at 1-800-564-6232 for a free inspection. We tell you whether a repair will do the job before anyone talks about replacement.
Questions homeowners ask about this repair
What is fascia wrap?
Bent aluminum that covers the wood fascia board so it never sees weather or needs paint.
Is loose fascia wrap a big deal?
It can be. Water gets behind it and rots the board, and soffit can drop out.
Can you match white aluminum?
Yes, white coil and soffit are standard and match closely.
Do you do fascia and soffit repair in Chesterfield?
Yes. Call 314-429-6000.
Do you replace soffit vents?
Yes. We repair and replace soffit panels, including vented panels.
Can loose fascia damage gutters?
Yes. Gutters hang on the fascia, so a loose edge can make them sag.