At a glance: Completed October 16, 2026: a full tear-off and replacement on Kelly Road, Plainview, IL. Shingle: OC Duration. Size: 35.67 squares. Underlayment: synthetic underlayment across the full deck. Office: St. Louis, 314-429-6000.
A big 35.67-square roof, about 3,567 square feet of surface on Kelly Road in Plainview, IL, a small Macoupin County village in southwestern Illinois. We replaced 1 other roof in ZIP 62685 that same month. OC Duration went over synthetic underlayment across the full deck, with ice and water membrane at the eaves and valleys.
Project record
| Location | Kelly Road (Plainview, IL 62685) |
|---|---|
| Completed | Friday, October 16, 2026 |
| Opened to completed | 59 days |
| Roof size | 35.67 squares (about 3,567 sq ft) |
| Scope of work | Full tear-off and roof replacement |
| Shingle | Owens Corning — OC Duration |
| Underlayment | JBI Synthetic |
| Ice & water | Alco Ice & Water |
| Starter course | OC Starter |
| Hip & ridge | OC ProEdge Hip & Ridge |
| Ventilation | Lomanco Omni Roll ridge vent |
| Warranty | Lifetime workmanship warranty |
| Project number | STL081826036 |
Choosing a color for your own roof? Browse every Owens Corning TruDefinition Duration color on a whole-house preview in our OC Duration color selector.
Materials installed, layer by layer
The feature that defines Owens Corning Duration is SureNail Technology, a tough woven fabric band in the nailing zone that the fasteners go through for better hold. The shingle is only the top layer. Here’s the full system that went on this house:
- A full layer of synthetic underlayment. It’s the backup water barrier under the shingles, and it holds up to foot traffic and wind far better than paper felt.
- Self-sealing ice and water membrane where water concentrates. It seals around every nail driven through it, which matters in valleys and at the eaves.
- OC Starter strip along every edge. The first course is where wind gets under a roof. A factory starter with its own sealant line locks it down.
- OC ProEdge Hip & Ridge cap. Pre-formed cap that seals the hips and ridge.
- Lomanco Omni Roll ridge vent. It runs along the peak and lets hot, damp attic air escape. That protects the decking and keeps shingles from baking from below.
Who installed it
John Beal Roofing crews out of our St. Louis office installed this roof. From the day the job was opened (August 18, 2026) to the day the crew finished (October 16, 2026) took 59 days. We’ve been family-owned since 1947, and every roof comes with our lifetime workmanship warranty on top of the manufacturer’s material coverage. If a storm opens up a roof at 2 a.m., someone answers the phone. See 24/7 emergency service.
Need a roof in Plainview?
Free inspection, documented slope by slope, no obligation. St. Louis office: 314-429-6000
Common questions about this job
What shingle was installed on this Plainview roof?
Owens Corning OC Duration, over synthetic underlayment across the full deck. The full system is in the project details table above.
What kind of ventilation went on this roof?
A Lomanco Omni Roll ridge vent along the peak. Paired with soffit intake, it lets hot, moist attic air escape.
How big was the roof on Kelly Road?
35.67 squares, or about 3,567 square feet of roof surface. A roofing square is 100 square feet. Roofs are measured and priced that way, not by the square footage of the floor plan.
How long did this project take from start to finish?
59 days from the day the job was opened to the day the crew finished. Most of that time is scheduling, material ordering and any insurance paperwork. The tear-off and install usually take a day or two on a house this size.
Who do I call about a roof in Plainview?
Our St. Louis office at 314-429-6000. A person answers 24 hours a day, including nights, weekends and holidays.

