At a glance: Completed October 16, 2026: a full tear-off and replacement on Bur Oak Drive, St. Louis, MO. Shingle: OC Supreme. Size: 33.67 squares. Underlayment: synthetic underlayment across the full deck. Office: St. Louis, 314-429-6000.
On Bur Oak Drive in St. Louis, MO (west St. Louis County near Maryland Heights, a few minutes from our headquarters), the crew tore off and replaced a mid-size 33.67-square roof, roughly 3,367 square feet. It was the first of 2 roofs we've finished on Bur Oak Drive in the past few months. The system: synthetic underlayment across the full deck, ice and water membrane in the valleys and at the eaves, and OC Supreme on top.
Project record
| Location | Bur Oak Drive (St. Louis, MO 63146) |
|---|---|
| Completed | Friday, October 16, 2026 |
| Opened to completed | 36 days |
| Roof size | 33.67 squares (about 3,367 sq ft) |
| Scope of work | Full tear-off and roof replacement |
| Shingle | Owens Corning — OC Supreme |
| Underlayment | JBI Synthetic |
| Ice & water | Ice & water membrane |
| Starter course | Factory starter |
| Hip & ridge | Owens Corning Hip & Ridge |
| Ventilation | Lomanco Omni Roll ridge vent |
| Warranty | Lifetime workmanship warranty |
| Project number | STL091026021 |
Want to see what OC Supreme looks like on a whole house? Try every color in our OC Supreme color selector.
Materials installed, layer by layer
Owens Corning Supreme is a traditional three-tab shingle, a flat, uniform look that suits smaller sections, outbuildings and homes that were originally built with three-tab. Every one of our replacements is a system, not just shingles. On this roof, from the deck up:
- Synthetic underlayment, edge to edge. It doesn’t wrinkle or tear like felt, and it keeps the deck dry if a shower pops up mid-job.
- Self-sealing ice and water membrane where water concentrates. It seals around every nail driven through it, which matters in valleys and at the eaves.
- Factory starter strip along every edge. The first course is where wind gets under a roof. A factory starter with its own sealant line locks it down.
- Owens Corning Hip & Ridge on the hips and peak. Matching cap shingles made for the job, not field shingles cut into pieces.
- Lomanco Omni Roll ridge vent. Continuous exhaust at the peak. Together with the soffit intake, it moves heat and moisture out of the attic.
The crew behind this roof
This was a St. Louis office job, installed by John Beal Roofing. From the day the job was opened (September 10, 2026) to the day the crew finished (October 16, 2026) took 36 days. Family-owned since 1947, we back every replacement with a lifetime workmanship warranty. We answer the phone around the clock, storms included. See 24/7 emergency service.
Need a roof in St. Louis?
Free inspection, documented slope by slope, no obligation. St. Louis office: 314-429-6000
Questions homeowners ask about this project
What shingle was installed on this St. Louis roof?
Owens Corning OC Supreme, over synthetic underlayment across the full deck. The full system is in the project details table above.
Does John Beal Roofing work in St. Louis, MO?
Yes. St. Louis is served by our St. Louis office, and we've completed 135 roof replacements there in the last few months alone. Call 314-429-6000 for a free inspection.
How big was the roof on Bur Oak Drive?
33.67 squares, or about 3,367 square feet of roof surface. A roofing square is 100 square feet. Roofs are measured and priced that way, not by the square footage of the floor plan.
How long did this project take from start to finish?
36 days from the day the job was opened to the day the crew finished. Most of that time is scheduling, material ordering and any insurance paperwork. The tear-off and install usually take a day or two on a house this size.
Who do I call about a roof in St. Louis?
Our St. Louis office at 314-429-6000. A person answers 24 hours a day, including nights, weekends and holidays.